Lead Apron Quality Assurance
Medical facilities frequently use lead aprons during X-rays and interventional surgery using C-arms and fluoroscopy to prevent harmful scatter radiation and unnecessary radiation exposure from reaching the body. However, lead aprons can become damaged and less effective over long-term use.
Lead apron quality assurance ensures they’re:
Regularly inspected and maintained
Stored properly
Repaired as needed
Deep-cleaned and sanitized
Properly disposed of when the material becomes worn out
How does this process work? We’ll detail everything you should know in this article so you can screen lead aprons to keep your staff and patients safe during procedures that emit high doses of radiation.
How to Check the Quality of a Lead Apron?
A couple of key steps can help check the quality of lead aprons. Those are:
1. Deep Inspection Using X-Ray Scanning
The most important part of your lead apron check policy should be an annual X-ray scan for defects in the internal lead layer. While other steps can help, the X-ray scan is crucial since it can detect micro-holes in garments that would worsen over time.
A study from the Journal of Health Physics stated that tears in the lead lining of aprons can increase by over 270% in 10 months. Therefore, catching even minor defects ahead of time is essential to keep your staff and patients safe from harmful radiation.
Therefore, this process is time-consuming and costly, so medical facilities often prefer to have lead aprons professionally inspected rather than do it themselves.
We can help with this step at Radiological Care Services (RCS). Our RADCOMPLY™ inspection tracking system software maintains your inventory. Once you send them to us, we’ll perform deep scans of the aprons entire surface and send you a full report of our findings.
2. Visual Inspection and Tactile Inspection
Visual and tactile inspections don’t replace annual X-ray scans, and it’s challenging to detect a lot of defects through these procedures alone. Therefore, while they can be an added assessment measure, it’s important to perform them in conjunction with regular deep X-ray inspections for proper working order.
The visual scan involves laying the apron flat and looking for any visual defects, such as cracks, holes, or tears.
You can then perform a tactile inspection by running your hands along the apron’s surface and feeling for any bumps, abrasions, creases, or separated seams.
When you identify defects like these, it’s essential to get lead aprons repaired or replaced as soon as possible. We can assist with both lead apron repair and disposal at RCS.
Criteria for Rejection Based on Defect Size
When defects are uncovered, it’s essential to determine whether they’re repairable or whether the apron should be disposed of. A study by physicians T. McKeon and K. Lambert established rejection criteria for lead aprons with cracks, tears, or holes. The research stated that aprons should be rejected when defects exceed:
15 mm2 over critical organs like the gonads and thyroid
670 mm2 on the seams, back, or overlapped areas
11 mm2 on thyroid shields
When these lead apron specifications are met, they must be appropriately disposed of using approved methods that ensure worker and environmental safety.
How Often Should Protective Lead Aprons and Gloves Be Inspected for Quality Assurance?
We recommend performing an annual X-ray scan of lead aprons and other protective garments for radiation protection. This frequency helps catch defects early, ensuring the safety of clinicians and patients.
The Joint Commission (TJC) requires healthcare facilities to inspect medical equipment annually, including lead aprons, and document the inspection findings.
The previously mentioned study from the Journal of Health Physics also stated that semiannual inspections are a good idea for aprons with marginal defects already present.
Why Are Lead Aprons No Longer Recommended in Dentistry Practices?
When you hear that lead aprons are no longer recommended, it’s usually in dentistry. The American Dental Association (ADA) updated its guidelines in February 2024. They stated that lead aprons aren’t needed during dental X-rays using modern machinery that’s properly calibrated.
However, lead aprons with the appropriate lead equivalent are still essential during medical procedures. For example, the CDC states that fluoroscopy emits much higher radiation doses, making it unsafe to be around without wearing lead aprons and other protective garments. The same is true for other equipment like C-arms and medical X-rays.
How Does X-Ray Protective Gear Work?
The high density of lead is why it’s used in aprons and other protective equipment. Since lead is so dense, it can effectively slow down gamma rays and X-rays that contain radiation. It ends up absorbing the energy before it reaches the body, keeping the wearer safe.
How Thick Does Lead Need to be to Stop Radiation?
Research published in 2018 states that an effective X-ray lead apron thickness is between 0.25-1.0 mm. Lead aprons between 0.25-0.5 mm are the most common. The Journal of Clinical Orthopedic Trauma states that 0.5 mm lead aprons can attenuate up to 99% of scatter radiation due to their lead equivalence.
The Minimum Lead Equivalent NCRP 102 is a report that provides guidelines for medical procedures and radiation safety. Referring to it can ensure safe practices when selecting lead apron thickness, imaging equipment, and calibration settings.
Achieve Lead Apron Quality Assurance by Partnering with RCS
At Radiological Care Services (RCS), we’re here to help throughout the lead apron quality assurance process. Our services include:
The process is managed through our RADCOMPLY™ software to track inventories. We’ll make the entire process easy so your staff can focus on providing high-quality patient experiences while feeling confident that their protective garments are compliant and safe.
Contact RCS today to learn more about how we can help.